Bitspower Sedna C700M Kit Set for Cooler Master COSMOS C700M

Included is everything you'll need to custom water-cool your CPU inside your Cooler Master COSMOS C700M. Combining a water distribution reservoir, a pump, a radiator, high performance fans, and the CPU and VGA block, this kit has everything you need to make your PC look amazing while keeping temperatures totally under control.

With novice modders in mind, Bitspower designed a distribution reservoir that is easy to install while providing a professional look. Equipped with multiple water inlets and outlets to route the water from the radiator to the VGA and the CPU, this reservoirs also gives you more playroom for the graphics card location with the special inlet/outlet designed to prevent having to bend more tubes and create a cleaner look to your loop.

The Bitspower Sedna C700M Kit Set for Cooler Master COSMOS C700M, equipped with Bitspower Digital RGB, is sure to become the center of attention of your case with bright LEDs that are certified by ASUS AURA Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, ASRock Polychrome, BIOSTAR VIVID LED DJ, and Razer Chroma.

Compatibility :
Cooler Master COSMOS C700M

LED Color : Digital RGB

LED Strip Management By Bitspower Digital RGB And Certified By ASUS AURA Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, ASRock Polychrome, BIOSTAR VIVID LED DJ and Razer Chroma.

Included :
1set of BPTA-WDP700M-R-PWM
2set of BPTAN-NLS360-F2PB
1set of BPTA-CPUMS-DRGB
1set of BP-VG2080RD-A2
2set of BPTA-FX1812NT-3
1set of BPTA-FX1812NT-1
1set of BPTA-DTMC-V2
1set of TA-GFALP2231-GS
1set of TA-GMALP2231-GS
1set of BPTA-F95-GS
1set of BPTA-F06-GS
3set of BPTA-90RE-GS
7set of BPTA-DOTFH1420-GS
6pcs of BP-NCCLT14AC-L500

S1 Pump Spec.
Rated voltage：12V DC
Power consumption：17W
Maximum flow：960L/h
Noise：40~45dBA
Maximum system temperature：60℃
PWM：Yes
Electric Connector：Molex 4 Pin
Warranty：2 years

This image is for reference purposes only - not the actual finished product.

If there aren’t enough DRGB headers on the motherboard, you can use the "Bitspower Digital RGB Multi Function Controller", which is available for purchase via the link below:
https://shop.bitspower.com/index.php?route=product/product&product_id=7822

I wanna show off, but what's the support I'd need?

◆DRGB

The end of power supply is 3PIN. The sequence is +/D/↓ (some motherboards are shown +5V/D/↓, and the plug is like 4PIN but the 3rd PIN is empty). Please plug in the corresponding direction of motherboard, controller or the wire integrator for one to many. If choosing the motherboard as the power supply, the light effect can be synchronize with MB.