Download Installation Guide (All)

Term of warranty

Q&A

Bitspower Sedna 303C Kit Set for InWin 303 Series

Included is everything you'll need to custom water-cool your CPU inside your InWin 303 Series case. Combining a water distribution reservoir, a pump, 2 radiators, high performance fans, and the CPU and VGA block, this kit has everything you need to make your PC look amazing while keeping temperatures totally under control.

With novice modders in mind, Bitspower designed a reservoir that is easy to install while providing a professional look. Equipped with multiple water inlets and outlets to route the water from the radiator to the VGA than the CPU, this reservoirs also gives you more playroom for the graphics card location with a dual inlet/outlet designed to prevent having to bend more tubes and create a cleaner look to your loop.

The Bitspower Sedna 303C Kit Set for InWin 303 Series, equipped with Bitspower Digital RGB, is sure to become the center of attention of your case with bright LEDs that are certified by ASUS AURA Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, ASRock Polychrome, BIOSTAR VIVID LED DJ, and Razer Chroma.

 

Compatibility :
InWin 303 ATX Chassis

 

LED Color : Digital RGB

LED Strip Management By Bitspower Digital RGB And Certified By ASUS AURA Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, ASRock Polychrome, BIOSTAR VIVID LED DJ and Razer Chroma

Included :
1set of BPTA-WDP303C
1set of BPTAN-NLS360-F2PB
1set of BPTA-CPUMS-DRGB
1set of BP-VG2080RD-A2
1set of BPTA-FX1812NT-1
1set of BPTA-FX1812NT-3
1set of BPTA-DTMC-V2
1pcs of BP-WTP-C06
1pcs of BP-WTP-C95
1pcs of BP-WTP-C62
1pcs of BP-QR-C
2pcs of BP-WTP-C61
2pcs of BP-DG14AALPI
6pcs of BP-90R
10pcs of BP-EML14
5pcs of BP-NCCLT14AC-L500

 

SC1 Pump Spec
Power/Voltage:12
DC power:≤17W
Noise Level: 40~45 dBA
Electric Connector:Molex 4 Pin (Without PWM)
Warranty : 2 years

If there aren’t enough DRGB headers on the motherboard, you can use the "Bitspower Digital RGB Multi Function Controller", which is available for purchase via the link below:
https://shop.bitspower.com/index.php?route=product/product&product_id=7822

I wanna show off, but what's the support I'd need?

◆DRGB

The end of power supply is 3PIN. The sequence is +/D/↓ (some motherboards are shown +5V/D/↓, and the plug is like 4PIN but the 3rd PIN is empty). Please plug in the corresponding direction of motherboard, controller or the wire integrator for one to many. If choosing the motherboard as the power supply, the light effect can be synchronize with MB.

image

*** Bitspower reserves the right to change the product design and interpretations. These are subject to change without notice. Product colors and accessories are based on the actual product. ***
*** From 15th March 2018, all of our installation guides will be provided electronically via an easy-to-use QR code attached to the packaging. ***
*** Before filling in the water, please make sure all the components are installed correctly. To prevent any leakage which may damage the PC components, please perform a 24-hour leaking test with only the pump connected to the power supply. ***
Last updated :

Write a review

Please login or register to review

Bitspower Sedna 303C Kit Set for InWin 303 Series

  • Product Code: BPTA-WDP303-KIT
  • Availability: EOL
  • UPC:
  • EAN: