Sedna O11D Lite-F pump wont move the water around the loop

Question

I've got a Sedna o11D Lite-F distribuition reservoir with an EK CPU & GPU water blocks and 2x Corsair 360mm 30mm radiators and the pump wont move the water around the loop. It pumped water through CPU and GPU blocks at a slow rate and then the water stops moving. The pump is still spinning but it can't move the water through, like there is a blockage. I've checked the loop and I can blow through it, so I know it's not blocked. It's like the pump doesn't have enough pressure to push the water through.

Is there anything I can check to see if something is faulty or something I can do to make it work properly that I haven't done yet.

Thanks for your help.

Answer 1

Hello Jay,

It seems that the pump is stopped by the bubbles. Please have a try to turn it on and turn it off several times. Also please take away the stop fitting on the top of the distro plate until the pump works normally.
Any questions, feel free to contact us.