Sedna torque

Question

You previously recommended that I use bits power coolant and not EKWB coolant but I already have the coolant and it says ingredients: water based dyes, synergistic corrosion inhibitors. That’s all it says is in there coolant, since you suggested I use water based coolants then this shouldnt this be ok to run in the Sedna torque I have?. Also I was wondering about using colored coolants in this resivior/pump and how often I need to drain and clean it in order to keep it from staining.

Answer 1

Dear Customer,

Do you already have Bitspower coolant BP-ACMCD500?
If you do, you can use our coolant after you rush the whole system with distilled water. But if you meant since you already have EKWB coolant, and EKWB coolant is water-based dyes, synergistic corrosion inhibitors, you will keep going to use EKWB. If that, you may lose the warranty on the distro plate.
Here is our warranty term. 
https://shop.bitspower.com/index.php?route=information/information&information_id=11

It is hard to say how long the staining happens when you are using the dye.
It depends on the color deep or not. In normal, we advise our customers to check and clean the loop per three months. 
If you are afraid of staining, you can only use the clear coolant BP-ACMCD500.
Any questions, feel free to contact us.