bitspower touchaqua sedna o11d for lian li not pump not circulating water

Question

Good day,

I am attempting to test my water loop, I am adding water to the top middle insert. Once the water rises to the top, i attempt to start the pump for water circulation. The pump is not circulating water and it is a bit loud.

Please help

Answer 1

Hello Saba7k,

It seems that the pump was blocked by the bubbles.
Please open one fitting on the top of the distribution plate, and exhaust the water from the bottom by BPTA-EFW-GS fitting, make the water circulation to remove the bubbles. When the pump works normally, fill the distribution plate nearly full or turn the pump speed down by PWM function. It helps to make the noise down.
 Any question, feel free to contact us.

Answer 2

The top two fittings on top of the distribution plate are open. When i pour water through the middle top fittings i do not see it filling all of the sections within the distribution block. i can visually see sections were the water is not going into. Is there a way i can connect with someone and send pictures by chance?