asked in Technical problem by
I have a cyberpowerpc that I had to change the motherboard in. After changing the board, now the pump controller is beeping constantly.

I have tried all the fan ports and CPU and cpu-opt port on the motherboard, in both pwm and DC 100% and it will not stop beeping.

Please help, as the noise is irritating.

2 Answers

answered by (117k points)
Dear Customer,

Maybe the connection of the cable you used between the pump and the motherboard was wrong. Would you send us the receipt and photos of the cable?

shopservice@bitspower.com.tw
answered by (140 points)
If your P5D PWM pump is working but the controller is still alarming, it could be due to a sensor misread or firmware glitch rather than an actual malfunction. Make sure the RPM signal wire is properly connected, as missing or fluctuating RPM readings can trigger false alarms. Also, check for firmware updates or try resetting the controller. It's a common tech hiccup—sometimes things function fine but still throw errors, much like navigating a big shopping spot like Bugis Junction https://bugisjunctionsg.com/ , where everything's running smoothly even if a sign or two seems off. A quick inspection and reboot may solve the issue.

 

 

 

 

 

...