hai again.. i installed the waterblock to the letter.. bitspower orion 4090 on my msi gaming trio.. very high gpu n hotspot temp.. around 80c and 95c

Question

what the hell is happening? i put in all screw, tighten all, put thermal paste on gpu chip.. only memory temp is ok around 50c.. please help me.. if i reseat the block.. can i still use the original pads, its still new..

please help me bitspower

Answer 1

Dear Customer,

The Bitspower Orion 4090 MSI water block is for the front GPU, not for the back side of the card. The hotspot temp is around 80c and 95c, that's normal. If you use air cooling of the card, the hotspot temp is about 110c. And mostly, the hot spot temp won't affect the performance function of your card. If you still want to make the hotspot temp lower, you can add a fan or backside water block on the back plate of our water block.

Answer 2

The topic of the basketball stars came up when I posed this intriguing question to this one, which I understood, to answer following my interpretation.

Answer 3

GPU hotspot refers to the hottest point on a graphics processing unit 

(GPU Drift Hunters) during operation.

Answer 4

First, ensure that the thermal paste application is done correctly. Applying too much or too little can affect heat transfer efficiency. Additionally, ensure that the CPU block or GPU block is making proper contact with the processor or graphics chip respectively.

If reseating the block is necessary, you can typically reuse the original thermal pads as long as they are in good condition and have not been damaged during the removal process. However, if they show signs of wear or tear, it's best to replace them with new ones to ensure optimal thermal conductivity. When I feel like this, I start writing poems. Write my essay I'm here https://studyfy.com/

Answer 5

Cap nhat Keo bong da – Keonhacai – Keo nha cai, Ty Le Keo, Ty Le Keo Nha Cai 5 moi va chinh xac nhat. tylekeo88, bong88, keobong88. 

Website: https://keobongda247.cc