Can i get some help and information? (mineral oil , fitting)

Question

Can i get some help and information? (mineral oil , fitting)

8 Answers

lily · Answer 1 · 2022-06-06T08:17:28+0000

Dear Won,

If the Oring is in the thread, you can replace the O-ring with BP-WTP-O10-BK.

https://shop.bitspower.com/index.php?route=product/product&path=59_128_374&product_id=404
But if the O-ring is inside the rotary, it could not be opened and replaced the O-ring.

Also, we advise you to only use our coolant BPTA-CMCD500 as the coolant.
https://shop.bitspower.com/index.php?route=product/product&product_id=7443&search=500m

bruceEX · Answer 2 · 2025-03-19T12:45:31+0000

ミネラルオイルは、ほとんどの冷却システムで使用される標準的なOリングとは互換性がなく、膨張や劣化を引き起こします。Oリングを交換するだけでは、長期的な解決にはならない可能性があります。ミネラルオイルに耐性のある素材、例えば**Viton（FKM）やNitrile（NBR）**で作られたOリングを使用する必要があります。また、オイルによって回転継手に損傷や摩耗がないかも確認してください。計算器問題が続く場合は、システムの材料に適した冷却液に変更することを検討してください。

DEMETUZ · Answer 3 · 2025-04-05T12:58:25+0000

Swollen O-rings usually mean the material isn't resistant to the coolant you're using. Mineral oil can degrade standard rubber quickly. Try switching to silicone or Viton O-rings and test them before full use. Also, if you're into FC Mobile content, click here for all the latest FC Mobile Events, guides, and updates!

DEMETUZ · Answer 4 · 2025-04-05T12:58:45+0000

It sounds like the mineral oil caused a chemical reaction with the O-rings, which is unfortunately common with certain rubber types. You might be able to fix it by replacing the O-rings with ones made of a more compatible material like Viton. Also if you're documenting your setup visually and want clearer photos, you can mejorar imagen ****** using the Airbrush Image Enhancer for better detail.

bubbletea · Answer 5 · 2025-04-07T11:08:24+0000

Yes, in most cases, you can replace just the O-rings if the fittings themselves are not damaged or degraded. However, it’s critical to choose O-rings that are compatible with mineral oil, such as ones made from Viton (FKM) or nitrile rubber (NBR). Standard silicone or EPDM O-rings will swell and fail with mineral oils. Be sure bubble tea calories to clean the fittings thoroughly before installing the new O-rings to avoid residual oil damage.

eliasroz86 · Answer 6 · 2025-04-07T11:15:03+0000

Yes, you can probably get away with just replacing the O-rings, as long as the rest of the fitting is in good shape. But make sure the new O-rings are made from a material that works well with mineral oil—the ones when is national boba day 2025 that come by default usually aren’t. Look for mineral oil-compatible O-rings and give everything a good clean before reassembling.

eliasbloggers · Answer 7 · 2025-04-07T11:20:28+0000

While replacing the O-rings might work short term, you should check your entire cooling loop carefully. Mineral oil can leave residue and might degrade plastics, seals, or tubing over time. If all the fittings leaked and the O-rings swelled, it’s a sign they weren’t compatible with mineral oil to begin with. Consider bubble tea map whether using a non-conductive coolant specifically designed for PC loops might be safer in the long run.

DEMETUZ · Answer 8 · 2025-04-30T17:39:43+0000

commented May 18 by Tehrym_ijaz (100 points)

commented 4 days ago by Arup12 (100 points)
edited 4 days ago by Arup12

commented 2 days ago by Tehrym_ijaz (100 points)

Can i get some help and information? (mineral oil , fitting)

Please log in or register to answer this question.

8 Answers

Please log in or register to add a comment.

Please log in or register to add a comment.

Please log in or register to add a comment.

Please log in or register to add a comment.

Please log in or register to add a comment.

Please log in or register to add a comment.

Please log in or register to add a comment.

Please log in or register to add a comment.